Product Details:

DESCRIPTION
Slim round shaped customizable LED linear profile system for non-continuous direct or indirect lighting (or a combination of both).
The units consist of an aluminium base, medium-power 2 feet LED boards (for both up or down light) and a dedicated optical system.
The optical system is the core of this luminaire and consists of a combination of state-of-the art components: a bright white reflective foil, a batwing foil, a PMMA diffusor laminated with a glare control film and an optional chromed grid for optimum efficiency and optical comfort.
The profile system is compliant with the EN12464-1 and thus suitable for use in offices or any other workspaces where the lighting requirements are demanding.
The lighting units come in two standard lengths: 1260mm and 1820mm and each of them is suspended on thin black steel cables.
The units are mechanically connected with a click system that makes installation very easy. This click system also ensures thattwo profile units connected together can also be rotated 360° relative to each other afterwards. In this way, a downlight can also be turned into an uplight.
Moreover, each lighting unit is electrically fully pre-wired with halogen-free wiring and contains five-pole male and femaleelectrical connectors, which also makes the electrical connection between different units very easy.

MATERIALS
Profile base: extruded aluminium finished with scratch-resistant fine textured powder coating in matt white or matt black.Available in multiple anodized, spray painted, brushed or polished colours and finishes on request.
End caps: aluminium finished with scratch-resistant fine textured powder coating in matt white or matt black. Available in multiple anodized, spray painted, brushed or polished colours and finishes on request.
Mechanical clicker system: injection moulded black polycarbonate
End and middle parts for suspension set: die casted aluminium, finished in matt black spray paint
Diffusor: PMMA, 1.9mm
Uplight lens: polycarbonate clear
Glare reducing grid: black polycarbonate, finished with ultra-thin chrome layer
Suspension wire: blackened steel
Feedcord: black, 5×0,75mm²
5-pole connector: PA66

TECHNICALCHARACTERISTICS
Unit Dimensions: ø60, lengths of 1260mm or 1820mm
Average base thickness: 1.5 mm
Medium-power LED technology
CRI90
Binning of 3SCDM
Colour temperatures: 2700K, 3000K and 4000K. Other colour temperatures available on request
Light output:
Downlight: 3015lm (3000K, 1820mm module, batwing foil and chrome anti-glare grid), 36,2W (driver included), 83lm/W, UGR22
Uplight: 2777lm (3000K, 3ft module, clear PC lens) 24,7W (driver included), 112lm/W
Integrated electronic LED drivers: non-dimmable, DALI/Pushdim (Dali-2) flicker and noise-free dimming via amplitudemodulation (AM)
Power: 220-230V, 50-60Hz
960°C Glowwire rating
Only for indoor use